Power down your PS4 and check the cables. If the console just boots back into safe mode, then continue to the solutions listed below. This option is the one that you can normally use to exit safe mode, so give this a try to see if your PS4 will reboot normally. When your PS4 is in safe mode, the first option you’ll be given on the screen is to restart. Now that we’ve covered what the PS4 safe mode is intended for and the reasons behind why it might get stuck in an infinite loop, let’s take a look at the solutions you can use when dealing with a PS4 stuck in safe mode. An electrical short within the PS4 hardware prevents loading up the operating system.The CMOS memory chip has corrupted data on it.A PS4 firmware update that did not install correctly.The PS4 isn’t receiving enough power to operate properly.Your internal hard drive disk is no longer operating as it should be.The PS4 operating system has a corrupted file and thus no longer functions.The PS4 storage database has become badly corrupted, causing the operating system of the PS4 to no longer start.A PS4 cable is damaged, broken, or has come loose.Here is a comprehensive list of the reasons why a PS4 can get stuck in safe mode: A faulty hard drive is another issue that commonly pops up that forces your PS4 into safe mode to prevent you from accessing any of the corrupted data on the failing HDD. A close second cause is a cord that has come loose. The most common is due to a failed or interrupted console update. Now, connect a controller via its USB cable, and press the PS button on the controller to finish booting into safe mode.Ī console can get stuck in the PS4 safe mode loop for a variety of reasons.After the second beep, release the power button.You will hear two beeps, the first when you initially press and hold, and the second after about 7 seconds have passed. Once the console is off, you need to hold down the power button.Reinstall the system software (remove all user data & PS4 firmware).Initialize the PS4 into its original state (deletes all user content).Restore the PS4 to default (factory) settings.Update the system software via USB, disc, or direct download.Change the display resolution to 480p for troubleshooting purposes.By booting into safe mode on your PS4, you can do the following: Safe mode on PS4 is a diagnostic tool that you can use to change various settings on your PS4 console, as well as troubleshoot and fix various issues that may arise from time to time. Let’s take a look at what safe mode is, why a PS4 can get stuck in safe mode, and how to prevent this loop from happening in the future. The PS4 safe mode loop is an infinite cycle where your PS4 becomes stuck to always booting into safe mode, which means that the user only has access to the PS4’s most basic functions. All PlayStation 4 (PS4) models come with a built-in safe mode option, which is great for users that need to rebuild the database from time to time or run a hard reset on their console, but when your PS4 gets stuck in safe mode, this troubleshooter becomes quite a pain to deal with.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |